{"id":350,"date":"2023-10-21T18:32:15","date_gmt":"2023-10-21T18:32:15","guid":{"rendered":"https:\/\/newenglanddigitalradio.com\/wordpress\/?page_id=350"},"modified":"2025-01-27T20:51:19","modified_gmt":"2025-01-27T20:51:19","slug":"from-a-repeater","status":"publish","type":"page","link":"https:\/\/newenglanddigitalradio.com\/wordpress\/index.php\/from-a-repeater\/","title":{"rendered":"From a Repeater"},"content":{"rendered":"\n

Please note, even though you may be using YSF or D-Star, please register for a DMR ID at RadioID.net.<\/a> This ID will allow DMR users on the Reflector to hear you. If you do not register, you will not be able to talk to anyone on the Reflector that is on DMR.<\/em><\/strong><\/p>\n\n\n\n

YSF Access<\/mark><\/strong><\/h2>\n\n\n\n

To access the XLX097 Reflector<\/mark> through a YSF repeater<\/mark>,<\/strong> you will have to hit the <\/strong><\/mark>Wires-X Button<\/mark> on your radio to connect to the repeaters network capability. Once you are connected you will see a list of talk groups on your radio from there you can scroll to the (00097) \u2013 XLX097 Reflector<\/mark> or you can manually key it in from the keypad on the radio with the five digit number associated with each <\/mark>reflector (00097) for the XLX097 Reflector.<\/mark><\/p>\n\n\n\n

DMR Access<\/mark><\/strong><\/h2>\n\n\n\n

We have removed access to the Wolf Den from BrandMeister at this time. You can still access the network via DMR repeater if it supports the XLX Master setup through Talkgroup 6. As far as I know only the Rehoboth 442.950 repeater does. It wouldn’t hurt to ask you local DMR repeater trustee if they would enable it.<\/p>\n\n\n\n

D-STAR<\/mark><\/strong><\/h2>\n\n\n\n

To connect your ICOM D-STAR<\/mark> <\/mark>radio to the <\/mark>XLX097B reflector<\/mark> on The New England Digital Radio network, you’ll need to follow a few steps, these steps involve configuring your radio properly, understanding how D-STAR repeaters and reflectors work<\/mark>, and using the proper commands. Here’s a general guide:<\/mark><\/strong><\/p>\n\n\n\n

    \n
  1. D-STAR has 3 protocols<\/mark><\/strong>, from oldest to newest they are REF, XRF and DCS. As you can see XLX is not there. That’s because XLX is a reflector not a protocol. When making a call through the D-STAR Gateway it is best to use DCS. So to connect to the XLX097 reflector your URCALL will be DCS097.<\/li>\n\n\n\n
  2. Know Your Call Sign and Registration:<\/mark><\/strong> Ensure that your D-STAR call sign is registered. This is typically done through your local D-STAR repeater administrator or the D-STAR gateway registration system. Without a registered call sign, you won’t be able to use D-STAR networks.<\/li>\n\n\n\n
  3. Identify the XLX097 = DCS097 Reflector:<\/mark> <\/mark><\/strong>Determine the XLX097B = DCS097 reflector you want to connect to, including the module you wish to use. XLX = DCS097B reflectors typically have several modules, (A, B, C, etc.), each functioning as a separate conference room. Example: XLX097B=DCS097B (where 097 is the reflector number, and B is the module).<\/li>\n\n\n\n
  4. Set Up Your Radio: URCALL:<\/strong> <\/mark>Set this to the reflector and module you want to connect to. For example, DCS097B (to connect to module B of reflector 097). RPT1: Set this to the callsign of the local repeater or hotspot you’re accessing, followed by a space and the letter “C” (for example, REPEATER C OR HOTSPOT C.). RPT2: Set this to the callsign of the local repeaters or hotspots gateway, usually followed by a space and the letter “G” (for example, REPEATER G). Mycall: This should be your registered call sign.<\/li>\n\n\n\n
  5. Use the Link Command:<\/mark><\/strong> To link to the DCS097BL reflector, you’ll usually need to send a link command. This is typically done by setting the URCALL to DCS097BL where 097 is the reflector number, B is the module, and L stands for Link.<\/mark> <\/strong><\/li>\n\n\n\n
  6. Transmit:<\/strong> <\/mark>After setting the link command, key your radio for a second or two to send the command. Your radio should respond with a confirmation if the link is successful.<\/li>\n\n\n\n
  7. Check the Connection:<\/mark><\/strong> Once linked, you can set the URCALL to CQCQCQ to start using the reflector. Your voice will now go through the XLX097B reflector and be heard by everyone connected to that module.<\/li>\n\n\n\n
  8. Unlinking:<\/mark> <\/mark><\/strong>To unlink from the reflector, set URCALL to DCS097U where 097 is the reflector number, and U stand for Unlink). Key the radio to send the command.<\/li>\n\n\n\n
  9. Additional Considerations:<\/mark><\/strong> XLX Reflector Dashboard: You can often monitor the reflector activity via this link FDMR Monitor – Linked Systems (newenglanddigitalradio.com<\/a>)<\/a> or XLX097 Reflector Dashboard (newenglanddigitalradio.com)<\/a> . Network Status: Ensure your local repeater or hotspot is properly connected to the network and is capable of linking to XL097B reflector.<\/li>\n<\/ol>\n\n\n\n

    Example Configuration:<\/mark><\/strong><\/h2>\n\n\n\n

    If you want to connect to XLX097 module B, set URCALL: DCS097BL, RPT1: REPEATER C1<\/a><\/sup> or Hotspot C (replace REPEATER or HOTSPOT with your local repeater’s call or hotspot your call sign). RPT2: REPEATER G OR HOTSPOT G (same as above) MYCALL: Your Call Sign. Transmit briefly to link, then change URCALL to CQCQCQ to communicate. By following these steps, your ICOM D-STAR radio should be successfully connected to XLX097B reflector on the New England Digital Radio Network.<\/p>\n\n\n

    1. C is generally used for 2 Meter repeaters, where as B is generally used on 440 MHz repeater<\/em>. \u21a9\ufe0e<\/a><\/li><\/ol>","protected":false},"excerpt":{"rendered":"

      Please note, even though you may be using YSF or D-Star, please register for a DMR ID at RadioID.net. This ID will allow DMR users on the Reflector to hear you. If you do not register, you will not be able to talk to anyone on the Reflector that is on DMR. YSF Access To access the XLX097 Reflector through a YSF repeater, you will have to hit the Wires-X Button on your radio to connect to the repeaters network capability. Once you are connected you will see a list…<\/p>\n

      Read More Read More<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"footnotes":"[{\"content\":\"C is generally used for 2 Meter repeaters, where as B is generally used on 440 MHz repeater<\/em>.\",\"id\":\"090f1e1b-45fe-4a7a-967e-693c849d4af9\"}]"},"class_list":["post-350","page","type-page","status-publish","hentry"],"aioseo_notices":[],"_links":{"self":[{"href":"https:\/\/newenglanddigitalradio.com\/wordpress\/index.php\/wp-json\/wp\/v2\/pages\/350","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/newenglanddigitalradio.com\/wordpress\/index.php\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/newenglanddigitalradio.com\/wordpress\/index.php\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/newenglanddigitalradio.com\/wordpress\/index.php\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/newenglanddigitalradio.com\/wordpress\/index.php\/wp-json\/wp\/v2\/comments?post=350"}],"version-history":[{"count":37,"href":"https:\/\/newenglanddigitalradio.com\/wordpress\/index.php\/wp-json\/wp\/v2\/pages\/350\/revisions"}],"predecessor-version":[{"id":852,"href":"https:\/\/newenglanddigitalradio.com\/wordpress\/index.php\/wp-json\/wp\/v2\/pages\/350\/revisions\/852"}],"wp:attachment":[{"href":"https:\/\/newenglanddigitalradio.com\/wordpress\/index.php\/wp-json\/wp\/v2\/media?parent=350"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}